Subscribe to Our Newsletter

welcome To The One Thimble Blog

Faux Placket Hack for the Hickory & Spice Henley

Hickory & Spice Henley Faux Placket Hack

 

How to Hack a Faux Placket

Want to make the Hickory & Spice Henley a quicker sew? This past Christmas, I wanted to make one of these shirts for each of my three girls. It was almost Christmas by the time I got to that project on my list, so I decided to speed up the process by making their henleys into faux henleys.

Here’s how you can whip up your own faux henleys in no time flat!

H&S Faux Placket 1

When sewing a faux placket, you need to cut out only the longer of the two placket pieces. You don’t need as much fabric for the faux placket, so trim off 1/2” (1.27cm) from each long side. Those lines are already marked with notches, so that’s super easy!

Go ahead and clip the center notch on the top and bottom.

H&S Faux Placket 2

Fold the two long edges of the placket to the center. Press. Then fold up the bottom edge 1/2” (1.27cm). Press again.

While you’re pressing, go ahead and press a light crease down the center front of the shirt.

H&S Faux Placket 3

 

Using the shirt’s center front crease as a guide, line up the folded placket piece down the center of the shirt, with the placket’s cut edges facing the shirt and matching the top edge to the neckline. Pin or baste into place.

(I’ve also removed the color blocking for this particular version of the Hickory & Spice Henley. For that tutorial, go here.)

H&S Faux Placket 4

Carefully topstitch around the edges of the faux placket. Remember that you can use a straight stitch, as this will not need to stretch.

Go ahead and sew on any buttons or other non-functional closures. This helps it look legit. 😉

Next, you’ll sew the shoulder seams and prep the neckband as the pattern directs.

H&S Faux Placket 5

 

In the original pattern, the ends of the neckband get neatly tucked inside the placket pieces. Since there isn’t an “inside” anymore, simply pin the ends on top of the placket like so. The second side will go on top of the first in the same way.

Be sure to check which way the overlap should go! I’m always getting the boy’s overlap and the girl’s overlap switched if I’m not following my own instructions. (Silly me.)

(The fabric I used here is pretty stiff, and that curve there at the top of the placket isn’t going to line up very well with the raw edge of the neckline. It’s not a problem, though; if your fabric is like this, too, just match it up at the notch and end, and trim off the excess fabric after you sew the neckband on.)

Otherwise, sew on the neckband like in the original pattern.

H&S Faux Placket 6

And there you go! I love whipping out a quick faux henley placket when sewing time is limited (which, honestly, is most of the time). What do you think? Are you Team Real or Team Faux?

I hope you’ve enjoyed the Hickory & Spice Henley pattern hacks I’ve shared this week! I love all the ways this one pattern can be customized, altered, and made uniquely yours. I’m excited to see what you come up with! Share your creations with #OrangeDaisyPatterns, #HickoryandSpiceHenley and @orangedaisypatterns (on Instagram) so I can marvel at your amazingness!

Happy sewing!


Hickory & Spice Henley Stand Alone Cover You can purchase Jill’s pattern for the Hickory and Spice Henley HERE or visit her website to see more of her work HERE or purchase Issue 18 which contains this pattern HERE.

{ No comments }

 


Leave a Comment

Your email address will not be published. Required fields are marked *