welcome To The One Thimble Blog
‘Bunny Bag Pattern Hack‘
Template and Instructions to adapt the Darling Daisy Bag into a Bunny Bag
Created by Lauren Wright from Molly and Mama
For Confident Beginners
Finished Size –
Bag Body approximately 7 ½” (19cm) wide, 5” (12.5cm) high and 3” (7.5cm) wide
Bag with Handle approximately 9” (23cm) high
MATERIALS REQUIRED in addition to those included in the Darling Daisy Bag pattern
- 9” (23cm) x 7” (18cm) of plain or low volume fabric for the bunny face
- 7” (18cm) x 5” (12.5cm) of outer bag fabric for the back of the bunny ears
- 7” (18cm) x 5” (12.5cm) of pale pink fabric for the inner ears (or use scraps of the lining fabric)
- Wool felt scraps in two different shades of pink (for the heart shaped nose / two round cheeks)
- Fusible heat bonding web for appliqué (like Vliesofix)
- Embroidery needle and six stranded floss to match your felt colours, plus floss for the eyes
- Tracing paper or thin non-waxy lunch wrap paper
- Press cloth or fabric scrap
- General sewing supplies
- Print out of the Bunny Hack template (click to download the PDF template) ->Bunny-Bag-Pattern-Hack
BEFORE YOU BEGIN
This pattern hack is an additional adaptation to the Darling Daisy Bag. You’ll need the Darling Daisy Bag PDF pattern for complete instructions and the full template. You can purchase the pattern in the Molly and Mama store – http://www.mollyandmama.etsy.com or you might already have it as part of One Thimble Issue 12. Be sure to read the pattern from beginning to end before starting. This pattern is perfect for confident beginners. You will learn how to add a bunny face onto the Darling Daisy Bag to create a cute Easter gift.
The felt appliqué shapes on the bunny bag are secured with running stitch. Use back stitch for the embroidered mouth and eyes.
Print The Pattern
Print your Bunny Bag template in full size without any scaling or cropping. After printing, ensure the bunny bag shape has printed at the same size at the Darling Daisy Bag shape.
Cut Out the Bag
Use the instructions in the Darling Daisy Bag to cut out and prepare all of your bag pieces. The only change to the pattern is that one of the outer bag pieces will become the bunny face of the bag. Use a plain or low volume fabric for this piece and secure fusible fleece to the wrong side.
Put the bag pieces aside for now, so we can concentrate on making the bunny face.
LET’S GET STITCHING
Use the bunny bag template to cut out one bag side (from plain or low volume fabric) and one piece of fusible fleece. Follow the manufacturer’s instructions to fuse the fleece to the wrong side of the fabric. This will be referred to as the bunny face.
Trace the bunny bag template and facial details onto tracing paper. Cut out the template on the line.
Trace the cheeks and nose shapes onto the paper side of the fusible appliqué web and roughly cut around the outside of each shape.
Use a warm iron to press the fusible web onto the felt (being sure to cover the felt with a press cloth or scrap of fabric to avoid damage from the heat of the iron).
Cut out the shapes on the line and peel off the backing paper.
Use the tracing paper template placed over the bunny face to determine the placement of the cheeks and the nose. Remove the paper, cover the face with a press cloth, and iron the felt pieces in place. (Be sure the webbing side of the felt is facing the bunny face fabric).
Thread your embroidery needle with two strands of embroidery floss in a colour to match your felt. Sew around the outside edge of each shape with running stitch.
Pin the tracing paper template over the bunny face, lining up the nose shape and cheeks.
Thread your needle with two strands of pink floss. Back stitch the mouth embroidery directly through the tracing paper, being careful to follow the drawn lines exactly. Change your floss colour to light brown and then back stitch the eyes and eye lashes using the same method.
Secure your stitches well at the back and then carefully tear the tracing paper to remove it from the face. Hold the stitches as you pull, so as not to damage them. Use a needle to tease any stray bits of paper out from under the stitching, if necessary.
The completed face will look like this.
Now it’s time to make the ears! You may like to create your own template for longer ears, or ears with points. I’ve made mine short and rounded so that they don’t get in the way of any egg collecting fun to be had!
Cut out the ear template on the line. Pin the template to the inner ear and outer ear fabric and cut out two pairs of ears (each with pink or bag lining fabric for the inner ear and outer bag fabric for the outer ear).
Please note: These ears will be soft and flexible so will hang over your bag when finished. If you would prefer to have ears that are firm and stand upright, press a piece of medium weight fusible interfacing to the wrong side of the outer ear fabric before cutting out the ear shapes.
Place the pairs right sides together and pin. Sew around the outside curved edges of the ear shape, using a straight stitch and a ¼” or 5mm seam allowance. Leave the straight side on the bottom open for turning. Cut notches out of the curved tops of the ears, before turning them right side out and pressing them flat.
Place the ears side by side. Fold the inside edge of each ear over along the base (so that the edge is near the centre of the ear). Use a few small stitches to baste the fold in place. Make sure the folds are opposite on each ear!
Measure about 1” (2.5cm) in from each side of the top of the bunny face and make a mark. Place the outside edge of each ear at this mark and then pin the ear in place (so that the ear is facing down, and the raw edges of the ear line up with the raw edges of the top of the bunny face). At this stage, you may wish to angle the top of the ears so that they sit slightly sideways when in the seam. That way they’ll fall sideways away from the bunny face when the bag is complete.
Baste the ears in place using a scant 1/8” (3mm) seam allowance. Keep the ears facing down while you assemble the rest of the bag (being sure to keep them away from any seams).
Assemble the Bunny Bag
Use the instructions included in the Darling Daisy Bag pattern to sew the rest of the bag together.
Please note: When assembling the bag you will sew around the top edge of the bag. Be sure that the gap you leave in this top seam is on the back of the bag (the part of the bag that is opposite to the bunny face).
When the bag is complete, let your bunny ears flop over and then press them on an angle so that they don’t get in the way of any egg hunting and bag filling!
This pattern hack is for personal use only.
QUESTIONS AND FEEDBACK
I’d love to hear your feedback on Molly and Mama patterns. Please email Lauren at: MollyandMama@gmail.com.
And feel free to share your creations on the Molly and Mama Facebook Page: www.facebook.com/MollyandMama.
Use the hash tag #MollyandMama on Instagram – www.instagram.com/MollyandMama.
See more patterns at: http://www.MollyandMama.etsy.com.
Find lots of free tutorials and more, over on the Molly and Mama blog: www.MollyandMama.com.au.
Thank you for choosing a Molly and Mama pattern. I hope you have fun making and creating with it!
Happy sewing, Lauren x
Hi there! It’s Rachel Rossi again! If you loved the Timber! Quilt, then I’ve got a special treat for you; It’s a special little accessory to go along with your Timber! quilt that your little one is sure to love! It will take them for miles and miles of adventure without ever leaving your home: it’s a perfect little reading pillow. Complete with curious bears, singing birds, and pockets galore! This pillow not only gives you a place to lean and cozy up with your favorite book, but also a place to store your current books, pencils, bookmarks, and maybe even a few small treasures.
The Timber! quilt is perfect for anyone who loves appliqué or wants to work on their appliqué skills, be it learning or perfecting that skill. If you loved the Timber! pattern but were a little intimidated by the amount of appliqué it requires, I totally understand, but, once you see how easy it really is, you’ll be zooming your way through the pattern in no time!
Today I’ve got a raw edge appliqué tutorial for you—a full, step-by-step tutorial on how to achieve a lovely little raw edge appliqué. This is the only type of appliqué that I use in my patterns, because it is so very simple and I love the dimension and texture it adds to my quilts. If you’re an appliqué lover and want to see those patterns, be sure to check them out in my shop.
Rachel Rossi is a recent addition to the One Thimble family, bringing us the Timber! quilt pattern in Issue 14. She is a quilt designer based in Lancaster, Pennsylvania with modern quilt patterns that keep the tradition of quilting alive in a new and exciting way. With fresh & fun patterns and tutorials, you’re sure to be inspired over at her blog! But first, let’s get to know her a little better…
Hello fellow friends who love to sew – I’m Suzanne from Winter Wear Designs, and I am super excited to be here today!
All right, today I want to chat with you all about one of the most important and most commonly overlooked parts of the sewing process. And it starts before you sew a single stitch or even drool over that perfect fabric that you are about to buy. I am talking about measuring yourself. WAIT…. before you say, ‘boring’ and head over to another post, give me just two minutes of your time – they may change the way you view sewing for yourself forever.